Student name: Teacher: Physics Extended Experimental Investigation Term 2, 2016 Extended Experimental Investigation (EEI) task Each student will either choose a problem from the list of problems, or create his/her own problem The problem must be approved by your teacher. The context is electromagnetism. .You are required to: • Search for prior discoveries in your area • Design and conduct experiments to collect valid data (precision and accuracy) • Discuss your ideas and detail these discussions in your journal. You are also expected to share your findings with the scientific community. You must produce: • A written report of the investigation. • A daily journal (to be stamped by the teacher on a regular basis to monitor progress of the investigation). • Photographic and video evidence to show ownership of your work • A risk assessment of your experimental investigation. Final report Complete work to be submitted: • Written Report • Journal, • Risk assessment form(s) • Research approval form(S) • Video tapes/photographic evidence of your experimental investigation. About the written report: • Length: the body of the final report should be 4500 words long(discussion evaluation and conclusion) • Format: Times New Roman or Arial font, font size 12, 1.5 spacing, suitable margins. • Cover page: This cover page is to be attached to the front of your report, including student ID and teacher name. • Binding: all pages are to be secured with a staple. Do not use folders. • Referencing: The appropriate referencing system must be used, and a reference list must be attached at the end of your report. Although there is no set format for the report, an investigation report should include the following: • Abstract • Introduction: Your interpretation of the problem including a consideration of all the possible parameters. • Theoretical Research: Should explain the basic theory behind the problem. It must include equations. • Experimental Research: explanation of the experiments you carried out and their significance to the problem. This should include graphical representations of your findings. • Integration of theory with experiment: Tying together the practical and theoretical findings to validate your solution or parts of your solution. ? Practical support: Photographs, video (including possible use of video point), data studio graphs, or demonstration of experiments. ? Mathematical modelling: Maths fitting experimental data and/or computer simulation matching the data ? Conclusion. Independent and original work: On submission, you must sign a declaration stating that the report is your original work. If your work shows evidence of collusion with other students or plagiarism, teachers will assess only the part that is identified as the student’s own work. Conducting experiments: • Before conducting any experimental work, a risk assessment of the activity must be conducted. A risk assessment form is posted on EduKate. • If you need to borrow some equipment, it is vital to fill in an equipment request from (attached). All equipment will be shared between students. • To help you plan your investigation, fill the research plan attached and submit it to your teacher as early as possible. Asking for help: You do not have to discover everything yourself. You can discuss your research with your teachers, friends and family, even professionals scientists when appropriate. Discuss your ideas and seek suggestions but make sure to acknowledge their contributions. These contributions must appear in your journal. Your teachers will not know the solutions to the problems but will help you understand the basic concepts that you encounter, so talk to them regularly to clarify your understanding. The journal Each student will keep an individual journal of their activities (notebook provided) The journal is a key element in demonstrating your individual contribution to the task. Every activity, thought, planning, discussion should be recorder in your journal. Entries in your journal should be brief but clearly indicate your activities: • Information from websites can be printed and inserted (don’t forget to note the address for referencing!) • Thoughts and planning to be written there • Equipment list to be included • Sketches or photographs of experimental set-up • Experimental observation should be noted • Results of experiments to be written or printed and inserted (tables and graphs) • References, discussion and advices should be clearly noted • During each lesson, you should get your teacher to stamp your journal. This will allow us to clearly see your progress. The journal should demonstrate an understanding of the problem and how the research was managed. It should show the steps carried out to solve the problem, the process through which knowledge was acquired, the experiments that were conducted and the lessons learnt and how this influenced future actions. It is very likely that your journal will contain far more information, research and results than your final report, as every experiment carried out may not prove to be successful or useful. The following evidence from your journal will be used to assist in determining the overall rating. Does the journal show that the student was able to: • Manage the research task effectively and efficiently • Work independently • Identify and apply risk management procedures • Clearly cite sources and contributions • Acquire construct and present knowledge and understanding of the concepts • Select appropriate equipment and apply technology to gather and record valid data • Evaluate the steps of the investigation and the adequacy of the data collected • Propose improvements and adapt experiment • Manage time effectively Usefull documents on K-Drive • List of problems • Risk assessment form • Research approval form • Hints on EEI • Graphing Induction Coil Gun: Construct a device capable of throwing metal rings at a range of a few meters. Part of an iron pipe is inserted on a coil. A conducting non-ferromagnetic ring is inserted in the pipe through its other extremity. An alternating current flowing through the coil creates an alternating magnetic field, which magnetizes the iron pipe. So, an alternating magnetic field is created around the pipe and induces a circumferential current flowing in the ring. This current is repelled by the magnetic field, forcing the ring to jump out of the pipe. Investigate the parameters which maximise the distance it fires the ring. Criteria A B C D E Establishing and developing an investigative process. IP1 Undertakes systematic preliminary research focused on the selection and development of a justified and considered research focus for the task. Undertakes systematic preliminary research focused on the selection and development of a justified research focus for the task. Undertakes preliminary research focused on the selection of an appropriate research focus for the task. Undertakes preliminary research to select a research focus for the task. Undertakes preliminary research on a given research focus for the task. Formulates and justifies significant researchable questions/hypothesis linked to the research focus. Formulates and justifies researchable questions/hypothesis linked to the research focus. Formulates researchable questions related to the research focus. Selects a researchable question related to the research focus. . Devises and designs efficient/effective investigations that are related to the key aspects of the researchable questions/hypothesis Designs investigations that are related to the key aspects of the researchable questions/hypothesis. Establishes a plan to conduct investigations related to the research focus Implements given investigative processes linked to the research focus. Implements scaffolded investigative processes linked to the research focus Conducting and managing the investigation. IP1 Refines investigations, manages research tasks effectively. Reviews investigations and manages research tasks. Manages investigations related to the research focus. Follows a negotiated plan to conduct investigations related to the research focus. Follows a given plan to conduct investigations related to the research focus. IP2 Selects, adapts and applies technology appropriately to gather and record valid data and information relevant to the stated researchable questions/hypothesis. Selects, adapts and applies technology appropriately to gather and record data and information linked to the stated researchable questions/hypothesis. Selects equipment and uses technology to gather and record data and information related to the research focus. Uses equipment and technology to gather and record data. Uses equipment, under direction, to gather data. Assesses and applies risk management procedures to the investigation and safely selects and adapts equipment. . Assesses and applies risk management procedures to the investigationsand safely selects and adapts equipment. . Applies general safety procedures related to experimental investigationsand safely selects and adapts equipment. . Follows defined safety procedures and uses equipment safely. Follows directed safety procedures. Analysis of data and discussion. IP3 Systematically analyses primary and secondary data to identify and establish relationships between variables based on trends and/or patterns linked to underlying concepts Analyses primary and secondary data to identify relationships between variables based on trends and/or patterns linked to underlying concepts. Analyses primary and secondary data to identify obvious patterns and trends linked to related concepts. Identifies obvious patterns in primary and secondary data. Records primary data linked to the research focus. Provides focussed discussion related to errors and anomalies in data. Provides focussed discussion related to errors and anomalies in data. Provides information related to obvious errors and anomalies in data. Provides information related to obvious errors in data KCU1 Utilises collected information to construct and present in depth knowledge and understanding of complex and challenging qualitative and quantitative concepts, theories and principles across a range of areas associated with the selected application/research focus. References collected information to construct and present an in depth knowledge and understanding of complex or challenging physics concepts, theories and principles associated with key aspects of the researchable questions/hypothesis. References the collected information to present knowledge of physics concepts, theories and principles associated with key aspects of the researchable questions/hypothesis. References the collected information to present knowledge of simple physics concepts/ideas related to aspects of the researchable questions/hypothesis. Reproduces knowledge of isolated physics facts related to the researchable questions/hypothesis. KCU2 Applies understandings to explain complex concepts, processes and phenomena linked to the selected application/research focus. Applies understandings to explain concepts, processes and phenomena linked to the selected application/research focus. Applies understandings to explain simple processes and phenomena linked to the selected application/research focus. Describes simple processes and phenomena linked to the selected application/research focus. Identifies isolated simple phenomena related to the selected application/research focus. KCU3 Algorithms/concepts/principles/theories/schema have been linked and applied appropriately to analyse and model complex and challenging situations linked to the research focus. Algorithms/concepts/principles/theories/schema have been linked and applied appropriately to analyse and model complex or challenging situations linked to the research focus. Algorithms/ principles/theories/schema have been applied appropriately to analyse and model simple situations linked to the research focus. Algorithms/ principles/theories/schema have been applied to the research focus. Simple given algorithmshave been applied to the research focus. Evaluation and conclusion. EC1 Analyses and critically evaluates complex scientific interrelationships between primary data, secondary data and suggested models. Analyses complex scientific interrelationships between primary data, secondary data and suggested models. Describes scientific interrelationships between primary data, secondary data and suggested models. Identifies simple scientific interrelationships between primary data and secondary data / suggested models. Identifies obvious scientific interrelationships between primary data and secondary data / suggested models. EC2 Explore scenarios linked to the research focus, suggesting possible outcomes, and generate justifiedconclusions/recommendations that provide a clear link to the collected data and stated hypothesis. Explain scenarios linked to the research focus, suggesting possible outcomes, and discuss conclusions/recommendations linked to the collected data and stated hypothesis. Describe scenarios linked to the research focus, suggesting possible outcomes linked to the collected data and stated hypothesis. Identify scenarios linked to the research focus or suggest possible outcomes linked to the collected data and stated hypothesis Makes statements that reference the collected data. Communication. EC3 Uses clear and concise vocabulary and scientific terminology with discrimination to clarify ideas and communicate information to the intended audience. Presentation consistently adheres to the requirements of the report as outlined in the task sheet. Uses clear and concise vocabulary and scientific terminology to communicate ideas and information to the intended audience. Presentation generally adheres to the requirements of the report as outlined in the task sheet. Uses clear and concise vocabulary and scientific terminology to communicate information. Presentation demonstrates significant deviations from the requirements of the report as outlined in the task sheet. Communicates information using scientific terminology. Presentation demonstrates major deviations from the requirements of the report as outlined in the task sheet. Communicates information. Presentation does not address the requirements of the report as outlined in the task sheet. Tables/graphs/diagrams have been chosen appropriately and clearly display meaningful patterns, trends and/or anomalies in the data. Tables/graphs/diagrams are appropriate, generally correct and display patterns, trends and/or anomalies in the data. Tables/graphs/diagrams present the data accurately and display obvious patterns in the data. Tables/graphs/diagrams present the data and display obvious patterns in the data. Tables/graphs/diagrams used to present the data. Adapts, translates and communicates understanding of the investigation in the abstract. Adapts and communicates understanding of the investigation in the abstract. Communicates understanding of the investigation in the abstract. Describes the investigation in the abstract. Comments on the investigation in the abstract. Criteria Summary Grades KCU1 KCU2 KCU3 IP1 IP2 IP3 EC1 EC2 EC3 KCU IP EC Name:_______________________________ How to do a Deadly EEI – by Dr Richard Walding, Research Fellow, School of Science, Griffith University Students: These are some hints about the requirements of a high quality Extended Experimental Investigation for the Queensland Senior Physics Syllabus. Guidelines given to you by your teacher should take precedence if there is any doubt. They are addressing a Year 12 EEI but will still guide you for Year 11. They refer to a hypothesis-testing EEI. What’s the purpose of an EEI? You’ll do an EEI to research a question you have about some physics-related phenomena you have come across. In the process you gain a better understanding of the concepts. It does not matter that your experiment has been done a thousand times before or that your teacher already knows the results. What matters is that you don’t know the results and that you can work independently to find a verifiable answer. Should I work in a group or by myself? The decision about working individually or in a group should be given careful consideration. In the real world,scientists work collaboratively across the full range of activities associated with a research task. Not all aspects of an EEI lend themselves to group work and while it is appropriate for you to work in a team to develop ideas and collect data your final report must show clear evidence of individual research, planning and analysis that uniquely reflects your understanding of and conclusions related to the research question. Conducting an EEI as an individual avoids some of the issues mentioned above but you still have the opportunity to discuss aspects of your EEI with other students who are working on a similar research question and collaborate in the collection of data. What are some tips for successful group work? Here are the best nine: • Work in a team, be inclusive • Establish each person’s role by negotiation and make use of other people’s strengths • Monitor and redefine timelines to suit progress • Participate in activities: be active and show consistent behaviour in group activities • Show interest when others are speaking and be an attentive listener • Participate in discussions: be active and maintain focus when group decision making is occuring • Welcome different justified opinions as valid and incorporate these views; be inclusive • Encourage participation of all and be sensitive to others’ needs • Show leadership in developing consensus and resolving conflicts. How do I find a research focus (topic) for my EEI? If you are in Year 11, you are most likely to be given an EEI topic by your teacher or are told to choose from a list of maybe half-a-dozen. This helps your teacher concentrate on experimental design, measurement and management skills. In Year 12 however, you are most likely to be given a much more free choice of the topic either within a specific context you may be currently studying, or outside of this. Wise choice of a topic can make or break your EEI. There are several ways to decide: 1. As you progress through your course of study identify concepts/ideas/applications that might be useful as a research focus for an EEI. That is, you should keep in mind some investigation you liked or wanted to know more about. 2. You could select from a list of ideas. Google “physics science fair projects” and you’ll see a lot. Alternatively look at the website seniorphysics.com/physics/eei.html. 3. It might be possible to introduce a degree of complexity to a simple investigation that you have encountered in class time. For example, you may have measured the latent heat if vaporization of water and then turn this into an EEI by aiming to measure the specific heat of salt water. 4. Lastly, you could have a ‘brainstorming session’. Get together with a group of other students and think up as many ideas as you can. Think creatively. Don’t comment on each of the ideas that come up. Do not criticise the ideas of others. Some ideas may seem silly or impractical but they can often act as a stimulus and trigger other ideas. The more ideas that are generated, the more likely it is that some of the ideas will prove useful. One member of the group needs to write down the ideas as they are generated. All students need to be involved in listening and thinking. When you have finished brainstorming take a look at the list that has been generated. Select from the list just four or five ideas which you think you might be interested in and able to investigate. As a group try to identify how you would carry out an investigation into these topics. How do I decide on a Research Question? Once you have decided the research topic you need to formulate a Research Question. It is often a broad question and identifies a query about the ‘world out there’. For example, you may ask: What effect will temperature have on the resistance of some wire? It must be a question so it should start with: How or What (forget about who, when, where and why; this is Physics not History or Geography). This is where many students first get into trouble; that is, proposing a research topic without formulating a good Research Question to guide their investigation. For example (this is what not to do): say your research topic is telescopes (which is fine) but your Research Question is How to make and test a telescope. A research question of this nature will limit your ability to access the criteria at the upper end of the achievement continuum. If you do something like this you are doomed from the start as it is not specific enough. You need to establish a research topic that will allow you to demonstrate engagement with the investigative process. The other things students do is to propose Research Questions that are little more than laboratory analysis, e.g. “what is the specific heat of brass?”. This will not lead to a good EEI; it is just laboratory analysis without any design and critical thinking. If it “was what is the best method for measuring the specific heat of metals” , you would be off to a better start. What’s the difference in wording between an Aim and a Research Question? You will need to develop a properly worded “Aim” for your investigation but leave the exact wording until later. The Aim is a refinement of the broad Research Question; it narrows and describes the parameters actually used within the experiment. It should be in the form of an explicit statement relating to your variables, eg: “To investigate the effect of (independent variable) on (dependent variable) when (controlled variables) are kept constant”. Here’s an example: “To investigate the effect of temperature on the resistance of nichrome wire when its length and cross-sectional area are kept constant”. A ‘Deadly EEI’ will have an even more explicit Aim: “To investigate the effect of temperature on the resistance of a 50.0 cm length nichrome wire of cross-sectional area 1.0 mm2.” This aim allows us to set the boundaries within which the investigation will proceed. It is critically important as it makes sure your investigation will not be too big or too small. Do I need a hypothesis? Not all scientific research involves testing hypotheses but for a Senior Physics EEI, most schools will require it. There is no mention in the syllabus of necessarily proposing a hypothesis but most teachers make it a requirement of the task. These guidelines are written with that in mind. The formulation of a hypothesis forces you to state clearly what you intend to measure and change. This is crucial as a lead in to your experimental design. How do I write a hypothesis? In real experiments, real hypotheses should be written before the actual experiment begins. A hypothesis should not be confused with a theory. Theories are general explanations based on a large amount of data. For example, Newton’s theory about gravitation applies to all matter and is confirmed by a wide range of observations. However, there are many things about gravity that are not fully understood so physicists are forever proposing and testing hypotheses about it. Usually, a hypothesis is based on some previous observation. For example: noticing that the pitch of a guitar string increases when it is tightened. Are these two events connected and, if so, in what way? Terminology reminder: Formalized hypotheses contain two variables. One is “independent” or sometimes called “manipulated”; and the other is “dependent”. The independent variable is the one you, the “student physicist”, manipulates (changes) and the dependent variable is the one that you observe and/or measure the results of. Factors that you control are called the “controlled” variables. In the example above, the manipulated variable is temperature, the dependent variable is resistance, and the controlled variables are the type of wire, its length and cross-sectional area, and the voltage. Writing a hypothesis is the tricky part and probably the most important part of an EEI. All EEIs have a Research Question followed by a more specific Aim, generally followed by a ‘testable’ hypothesis. This hypothesis gives a tentative explanation for an observation, phenomenon, scientific problem (posed in the Research Question) that can be tested by investigation. Most of the time a hypothesis begins like this: “As ____(this is done) _____, then _____(this will happen) ”. For example, a hypothesis for the electricity question above might be: As the temperature is increased then the resistance will decrease. In general: As __________ increases _______ will increase/decrease/ stay the same. A ‘Deadly’ hypothesis goes further. It will present: (a) this general statement; (b) identify the expected form of the relationship between the variables; and (c) the controlled parameters identified. For example: It was hypothesised that the resistance of a 50.0 cm length of nichrome wire of 1.0 mm2 cross sectional area with a potential difference of 6.0 V across its end will decrease with temperature in the form of R is inversely proportional to T. OR It was hypothesised that the relationship between the resistance of nichrome wire and the temperature of the wire is inversely proportional where the length of the wire is 50.0 cm, the cross section of the wire is 1.0 mm2 and the potential difference across the wire is 6.0 V. It was hypothesized that… if …(the independent variable is changed in this way) …, then …(the dependent variable will respond in this way )… when …(the controlled variables are kept this way). For all hypotheses you must decide on the three types of variables and state them in your report. How can I state a hypothesis if I don’t know what will happen when I make a change? The ultimate value of a formalized hypothesis is it forces you to think about what results you should look for in an experiment and should inform (be the basis for) the experimental design. If you are not sure what will happen to the dependent variable when you make the changes to the independent variable then you could use the word “may”. For example: if the temperature of a golf ball is increased then the bounce height may change. This is still a hypothesis because it uses the tentative word “may” but it lacks complexity and thus limits your capacity to demonstrate the higher order thinking skills required to access the criteria at the higher achievement levels. You’d be better off reading up on the physics theory and making the statement definite: if the temperature of a golf ball is increased then the bounce height will decrease. So what if your hypothesis is not confirmed? So long as you can base it on well-argued physics theory then it won’t matter. Nobel laureate and Brisbane-based scientist Peter Doherty said that he often writes his hypotheses after the experiments are finished to make the report easier to understand. How many variables should I investigate? So that you have sufficient time for the experiment you may chose to investigate only one dependent and one independent variable. However, depending on the complexity of the task, you may find it necessary to investigate more than one variable so as to allow a depth of analysis. To ensure that the task allows for a sufficient degree of complexity it may be necessary to include two independent variables. This will depend upon the nature of the research focus. For the resistance experiment a second independent variable could be the diameter of the wire. Or you could change the type of wire – compare nichrome with platinum etc and see if their temperature/resistance curves are similar. The concern with selecting too many dependent variables is that the experimental design will become increasingly more complex and you risk taking on more than can be achieved in the time available. So be warned and take the time to discuss you planning with your teacher. What makes a good Hypothesis? Your hypothesis should be something that you can actually test – what’s called a testable hypothesis. In other words, you need to be able to measure both “what you do” (change the temperature) and “what will happen” (resistance will change). It also forms the basis of your later analysis of the data. The requirements for a good hypothesis includes the magnificent seven: 1. It has to define the variables. That is, state the dependent and independent variables (and mention the controlled variables). 2. It has to link the variables. That is, it must make a statement about a change in the independent variable (IV) and its effect on the dependent variable (DV) in the form: if…then…. 3. It has to be testable. That is, you can actually carry out the investigation and get some results which will clearly either support or refute (contradict) the hypothesis. Some examples are: • if the temperature of a golf ball (IV) is increased then it’s bounce height (DV) will decrease; • if the canopy area of a parachute (IV) is decreased then it’s drop time (DV) will also decrease. Note: If your investigation is more trial and error then you may choose a more general statement (a “prediction” rather than a formalized hypothesis): • if the mass of water, pressure and nozzle diameter of a water rocket are changed then the maximum height will change; • if the shape of the tail fetches of an arrow are changed then the arrow’s range will change. A hypothesis that would not be testable is: as the Earth warms then the amount of carbon dioxide in the oceans decreases. 4. It has to be significant. That is, it has to be worth knowing and not too trivial. An important question to ask is: are my results of practical or scientific importance (eg design of insulation in clothing, sporting gear, electronic equipment, adding to scientific knowledge etc). A hypothesis is also not significant if it is just about proving what is already well known (eg Newton’s Second Law) or something that is too dumb: eg that if water is heated then its temperature rises. Don’t just state the bleeding obvious!! 5. It has to be valid. That is, it has to be based on some physics concept, idea, law or principle. The hypotheses given in Point 3 above are all valid. Hypotheses that are not valid would include: • that chocolate ice-cream tastes better than vanilla (this is Physics not Playschool); • that the specific heat of a metal varies with the time of day (it may be testable but what are the physics principles?). 6. It has to be manageable. That is, it has to be able to be conducted over a period of a few weeks. It would be of no use to begin an experiment on the annual variation of geomagnetism and expect useful results over two weeks. As well, you should consider if you can manage with the usual laboratory or home equipment. It is no good expecting the school to order equipment or chemicals as they may take weeks to arrive; and you should also find out if your school will be paying for it. You could assume that technical advice about using equipment (e.g. data loggers, video capture cameras, computer interfaces, CROs etc will be given by your teacher or the laboratory technicians – but this may not always be the case. 7. It has to be safe. You shouldn’t formulate an EEI that requires adult supervision (driving a car, using radioactive samples, firing arrows or bullets, heat of combustion of petrol) when no supervision will be available or the hazards cannot be minimized or controlled. You will be expected to complete a Risk Assessment form anyway so it might be best to quickly decide if your project is safe from the outset and not waste time. Do I need a logbook or journal? If so, what do I keep in it; is it assessed? A logbook or journal is notebook in which you can record your research question, aim, hypothesis, the list of equipment that you need, your method, all results and all other work. Practicing scientists use this technique all the time. Essentially, it is a no-frills, on-the-spot recording of the essentials of your work in one place and can be later used for your report writing. If you make changes to the method or if you have problems which need to be overcome, this information should be recorded. You might like to include diagrams of the equipment that you used, especially if it is a very special arrangement of unusual equipment. If you have difficulty with drawing, a photograph could be useful. It need only be intelligible to you but it may be used to verify the authenticity of your work. A note from a professional scientist can be found at seniorphysics.com/notebook.pdf Start writing in your journal from the start. Make a note of the date of each entry. Glue in sheets you have run off or have photocopied. Your journal may not be directly assessable but it can be used to verify that you have engaged in the research process. But teachers and review panels may choose to refer to your journal as a way of authenticating your work. You may prefer to keep your journal electronically as you go, so obviously it is okay for these to be typed. You may have to submit a printed copy with your report. How much background research do I need to do? You may be given class time to develop your research question, write a hypothesis and find supporting information. There are two areas that you need to collect information for. Both require reference to physics principles, facts and concepts. They are your: (a) Research focus (topic): what is the background theory (b) Hypothesis: how can it be justified You may spend some time on (a) before you can move on to (b). References: Keep detailed record of references as you collect information, not later. Have you used a variety of sources (not just Wikipedia)? How reliable are the sources? (a) What is needed for the background theory for my research topic? When you come to write your Introduction you will need to demonstrate to the reader your awareness of how you’re building on other scientists’ work. As this stage you should be locating, identifying and collecting relevant data and information. You will need to develop an understanding of the principles of your chosen topic. By use of the library, internet, textbooks or other source of information (parent, expert, others in your group) you should clarify some or all of the following: • Why your research topic has been chosen by you (is it personally relevant, e.g. your sport, hobby, career interest, personal needs, home life; is it important to industry, the environment or commerce; is it important for increasing an understanding the world about you, and so on). Even if your EEI topic has been given to you by the teacher (often in Year 11) you can still make a case for relevance. • What do we know already about this issue (up-to-date facts about the physics principles behind my research question). • Were there earlier ideas that have been overturned (perhaps a little bit about the history of the idea). • How is it measured (what measurement techniques might I use, and what others would be good but I have no access to them). The information must continually refer to your research question. Irrelevant content will be easily noticed and it will detract from your work. (b) What is needed for justification of my hypothesis? The second theoretical part of an EEI is about justifying your hypothesis, again by referring to physics principles. You will be given hints about writing your report later but you must be aware of what you are looking for otherwise you will waste time just scrolling through pages of irrelevant physics information. The key phrase is justifying your hypothesis. You have to show the reader that your hypothesis makes sense and is backed up by physics theory. So at this stage of the research process just gather information specifically related to your hypothesis. 1. Facts: Gather facts and information: they must be relevant to the hypothesis. Don’t just copy chunks of information unless it is relevant or helps you understand the concepts. This probably will include formulae so keep a note of the quantities (eg resistance, temperature), symbols (R, T) and units (ohms, ?; kelvin, K). You can select the useful information later. 2. Linking: Gather information to link the information together so that it tentatively supports your hypothesis. Eg: the nature of resistance and how temperature affects a metal? The key word is linking: don’t try to pretend you have linked the ideas. It will be so obvious to the teacher if you haven’t. 3. Measurement: Gather information about how the variables are to be measured. Ask: what instrument is used, how does it work, how is it connected up, and what are the techniques for using it and reading it accurately? It is important at this stage that you take note of the uncertainties involved in the measuring process. Later, you will take all of these measurement uncertainties into account and calculate both your absolute and residual errors involved in your investigation and make some sensible analysis of your results and measurements in the light of these errors. For instance, it is commonly assumed that any reading can be made to within a half-scale division of the measuring instrument. For a ruler graduated in millimetres this would mean an uncertainty of ± 0.5 mm and you would record this in your journal. How do I design my investigation? In your journal: • Define your variables. What is your: • independent (manipulated) variable/s (what you will change) • dependent variable/s (the result) • controlled variables (what you will keep constant). • Plan your approach: • Draw a diagram of your setup; • Make some rough estimates of the quantities you will be measuring (volume, time, temperature, mass, length, voltage, angle…); • Decide on how many trials to do. Three trials (i.e. three different values for the independent variable) may give enough data if the relationship is linear, but be warned, errors in measurement could cause an illusion of a linear relationship where none really exists. Four or five trials (i.e. with different values for the IV each time) are far better and should be considered a minimum; 7-9 data points would be better still if you really want a justifiable equation for your proposed relationships. For each trial you would be wise to collect data in duplicate (2), or even better, in triplicate (3). This is also useful for calculating your residual errors and helping with justification. • State the method briefly; propose a data table with columns labelled. Allow space for triplicate trials and an average if that’s what you are doing. • Decide what equipment will be necessary. • Ensure the design of the experiment is both effective (will test the hypothesis) and efficient (not a lot of wasted time). For example, you don’t want to have to reassemble the equipment for each trial. • Ensure that you assess the risk and make a selection or adaptation of equipment with safety in mind. • Ensure you use appropriate technology to gather, record and process the data. What happens if there are concerns about the viability of my EEI proposal? By this stage you will probably have reached the first Checkpoint (or Monitoring) and will have to complete some forms for your teacher. If you can state your Research Question, Hypothesis and overview of the plan you should get a quick go-ahead. Often various forms are to be submitted to your teacher for review and approval. They may include: • Research Proposal Sheet. • Risk Assessment Sheet • Materials Requisition Sheet (be as specific as you can to speed things up). How will I know what size to make the variables? EITHER – Use formulae and calculations to establish a range of workable values; OR – Do some preliminary trials (sometimes called a Pilot Study) – and you should record all observations, measurements, problems, changes in approach and modifications to your initial plans and procedure in your journal. If it doesn’t work and looks like it will never work then talk to your teacher and perhaps abandon it quickly. How long should I spend on the laboratory work itself? You would be wise to restrict the time spent on the experimental work to between one-quarter and one-half of the total time, assuming that the background is part of the EEI. If the background research is treated separately as an Extended Response Task (ERT), as some schools choose to do, then experimental work will take up more of the allocated time for the EEI. You should record all observations, measurements, problems in your journal. Once you start analysing your data you’ll probably find some anomalies that you’ll want to go back and check. Be prepared for this. You may think you have plenty of time but students always find they have to rush the report writing to meet the deadline. What is expected in a good EEI Report? A EEI Report is all about communicating ideas clearly and concisely. Remember you are not graded on the amount of forest cleared to make the paper used in your report. The syllabus makes it quite clear: for an “A” there should be discriminating selection, use and presentation of scientific data and ideas to make meaning accessible to intended audiences. Your intended audience may be specified in the criteria sheet but if it isn’t assume that it is one of your peers (Senior Physics students). Your goal should be for the information that you present to flow effortlessly from the page into the reader’s mind without the reader’s head ever snapping back in shock or drooping forwards as they doze. It takes a lot of practice to become a good writer, and you aren’t going to master the art overnight. But here are a few tips for you to focus on that will help you find your voice and keep your audience. Firstly, always, always, always write in clear, declarative sentences. Declarative means that the sentence simply states an idea or piece of information; it is not a command, request or question. This articleyou are reading has short and clear sentences. The topic sentence grabs your attention, just as any good topic sentence should. Each idea thereafter flows naturally into the next. This is how you should strive to write every paragraph of your EEI Report. Whatever you do, don’t overwork your sentences! Each sentence should contain just one complete idea. Too many run-on sentences read like the writer let him/herself be swept away in their own stream of consciousness. Was the writer too lazy to think about what he or she was trying to say? Should I use passive voice? Virtually every science paper is written in passive voice. However, prize-winning writers who know how to write hate passive voice, they struggle against passive voice at every opportunity. Why? Because passive voice seems boring as it makes the object of an action (the brass weights, the inclined plane) the subject of the sentence, rather than relating that a person (I, we) carried out the action. Active voice using personal pronouns is not recommended: Examples are: “We adjusted the inclined plane to…”. or “We took the data…”. But the Passive voice is recommended for scientific reports. Examples are: “This inclined plane was adjusted to …” or “The data was/were taken…” It is customary to use passive voice in scientific work but you should check the task criteria sheet because your teacher might want you to try something different by presenting your EEI in a different format. Many prestigious scientific journals now accept active voice. Remember, the key point isto make meaning accessible. How technical should I get? Scientists often use technical terms when communicating with each other in the same field but you must judge which technical terms need explaining. You should reserve technical jargon that is not familiar to fellow students only for those instances when jargon is actually appropriate. Students sometimes believe they can hide their ignorance or poor technique behind a smoke-screen of obtuse language. Being difficult to understand doesn’t make your writing sound more knowledgeable. It does more harm than good. Pretend you are explaining it to a classmate who has been away. Oscillation and flux density are okay, but anisotropy, isochoric and nanoarchitectonic need explaining. In summary: • short, clear, declarative sentences; consistent tense • familiar language • no unnecessary words • limit technical jargon and explain unfamiliar terms • grammar and spelling are free of error* • technical terms have been used appropriately. *Note –you must proof-read your report. Too many students simply trust the spell and grammar check on MSWord to do the editing work for them and miss some critical literacy issues. What are the main parts of the report? You will need to write an individual report but you can work on the design and data collection in collaboration with others in your group although it must be noted that design of investigation and management of the investigation are individually assessed criteria. Report writing involves collating all you’ve done into a report of your investigation. It should be like a story that unfolds as you go, making the reader wonder how well the hypothesis was confirmed. But it should also be persuasive, in the sense that you are persuading the reader that you were honest and accurate, and manipulated the variables carefully and it is undeniable that your conclusion follows logically. Other people’s ideas, statements, diagrams, photos and so on should be correctly referenced. Your work must not contain plagiarised material – this also includes copying large sections of the report from other members in your group. Consult one of the ‘what is plagiarism’ websites if you don’t have it on your school’s intranet. How much feedback should I expect from my draft report? The amount and format of feedback provided to students is usually determined at the school level but in general, you are more likely to get more feedback in Year 11 than in Year 12. Remember that ongoing discussion with your teacher as the EEI progresses is a form of feedback and probably more valuable, in many respects, that feedback on your draft report. You may be required to submit a draft of your report to your teacher for comment (usually once only) but remember that the amount and type of feedback given will be in general rather than specific terms to ensure that the final report reflects your understanding rather than your teacher’s understanding. MAIN PARTS OF A REPORT The words of the great scientist Schrödinger are worth quoting here: “if you cannot – in the long run – tell everyone what you have been doing, your doing has been worthless”. This is just as true for EEIs. When writing an EEI report your evidence and arguments should be provided in a very logical order that makes it easy and interesting to follow your train of thought. The headings given below are typical of an EEI report and will help you achieve this logical flow. 1. Title Page: subject, assessment task type, title, your name, date, teacher’s name. You may have to make a statement that this is your own work, and it may have to be countersigned by your parents. The task sheet will tell you this. 2. Table of Contents: include the page numbers for the beginning of each section. 3. Abstract (or Executive Summary) – not all schools require this. Note: write this after you have written the rest of your report. An abstract is a paragraph, that if read by itself, summarises the project in the least possible words (usually 100 – 200). It should include the aim, principles/techniques employed and a very brief statement of your results and conclusions. The criteria used will be: The abstract is a clear, concise, accurate representation of the project, linking the main ideas together well without added interpretation or criticism, misunderstandings or unnecessary details. 1. Begin with a topic sentence that is the major thesis (the Aim). 2. Purpose: state the research question and hypotheses 2. Method: the design 3. Results: concisely 4. Conclusions: implications of results. Can be recommendations, evaluations, applications, suggestions, new relationships, and hypotheses accepted or rejected. 5. Other information incidental findings to the main purpose of the document but must not distract attention from main theme. • Write one paragraph. • Write in complete sentences. • Use transition words to make the sentences flow (besides, furthermore, in addition, for example, for instance, in particular, finally, consequently, hence, although, however, in comparison, subsequently). • No equations or images and no references. What Are The Criteria For Judging A Good Abstract? The usual criteria by which the quality of an abstract is judged include: exhaustivity, accuracy, readability and coherence. Exhaustivitydeals with how extensively the abstract represents the original document in terms of the ideas, conclusions and so on in the original and yet maintains its brevity. Ask yourself the questions: Is there enough important information included in the abstract; and are unnecessary details included? Are the major “points” of the document brought out in the abstract? Accuracyrefers to the extent to which the abstract correctly represents the original text. Ask the question: could there be any misunderstandings in reading the abstract? Readabilityis how clearly, concisely, and precisely you have written the abstract. Ask the questions: How well is it worded? Are the points described accurately, succinctly, and unambiguously?” Cohesion/coherence is focused on how well the ideas presented in the abstract are linked together. Ask the question: does it read well? 4. The Introduction • Research Question and Aim: begin with your RQ and Aim, and why you think the work is interesting or relevant to the real world (with examples). Also include what you hoped to achieve when you started the project. • Theory Review: This will be used to tell a story that generates interest in the reader for the field of your research and link to the practical investigation to follow. It will draw on your library or internet research and will be referenced. You should be aiming to reproduce, interpret, explain and compare Physics concepts, theories and principles that directly relate to your project and contain no irrelevant or unnecessary details. In other words – don’t waffle on; every irrelevant sentence is a step backwards. Your aim is to show understanding of the physics involved and how it directly relates to and supports your project’s research question and aim. In the earlier notes it was suggested you consider: • Why your research topic has been chosen by you • What do we know already about this issue (physics theory in detail) • Were there earlier ideas that have been overturned • How is it measured Note: if, at your school, you have done this section as an Extended Response Task (ERT), a brief summary of your findings would be appropriate here. • Hypothesis: state your clearly formulated and testable hypothesis, as well as explanation of your idea: “It was hypothesised that the….”. • Justification: you will need to justify your hypothesis by referring to relevant physics principles from your research so far. This is where students first get into real trouble. While much of your report needs to seem impartial, you really need to write this more in a persuasive style. You should be trying to persuade the reader that your hypothesis is logically supported by physics theory with links made between underlying concepts and you should aim at convincing the reader of your point of view. • Planning & Preliminary trials: • Introduction: What values you chose to try for your manipulated variable/s (eg masses of 0.1 kg to 0.8 kg) • Method: What you did; and diagrams or photos as necessary. • Results: Presented in appropriate form (tables, graph etc). • Discussion: Could measurable results be obtained? Could you collect sufficient data? You are not expected to make a conclusion about the relationships between variables as outlined in the Aim, Research Question and Hypothesis. This is a discussion about the experimental design. • Conclusion: How the original plan is to be modified in light of the pilot study. 5. Method. Describe in detail the method you used to collect your data and organize your observations. Your report should be detailed enough for anyone to be able to repeat your experiment by just reading the paper, so keep this fact in mind when you write it. In other words, it has to be ‘Replicable’, meaning that someone else could repeat the experiment by following your method. It’s always a good idea to include detailed photographs or clearly-labelled drawings of any device you made to carry out your research. You can also include how raw data is to be treated, that is, what formulae are applied. 6. Results and Analysis Results: The collected results should be displayed in forms that are appropriate to your data; eg tables, graphs, photos. No doubt you have learnt how to present graphs and tables so they won’t be dealt with again here. The key is that the results presented should be chosen with discrimination; that is, don’t include mistakes or data unrelated to your hypothesis (eg air pressure, colour of the wires, brand of meter…). Deciding between tables and graphs. The strength of a table lies in its ability to show large amounts of exact data, whereas the strength of a graph is its clear illustration of important trends between the variables. If you feel that the full impact of the results aren’t shown in a table then use a graph and put the table in an appendix (but it is essential to refer to each appendix within the main body of the report; for example, ‘For the full data set, see Appendix B’). All tables, graphs, pictures and diagrams should be numbered and given a comprehensive title. Reference any you have copied from other sources. Analysis: Start by talking about what you did to the data (average, graph, correlations, …), why you did it and what you obtained by doing it. It must be in a logical order. This is an opportunity to identify any trends or patterns in your data, or examine any mathematical relationships in your data. Calculations such as averages, substitution into equations, gradients, intercepts – and so on – may be shown as necessary. If a large number of repetitive calculations (e.g. rate of change, solution concentrations, density etc) need to be performed, put one sample calculation in your report and then the rest can be performed and then placed in a table. Where numerous graphs or tables are used to extract main results (eg area under v/t graphs; slope of s/t graph), these graphs or tables should go in an appendix. Error analysis: You will need to undertake an error analysis. This could be as simple as a qualitative description or as complex as a full numerical error calculation. However, it is the logic that is important and some quantification of accuracy should be evident. Consult a text to find out the way to do it. 7. Discussion In simple terms, the Discussion is where you explain what you make of the Results you obtained. If you have done the Results & Analysis part well, your readers should already recognize the trends in the data and have a fairly clear idea of whether your hypothesis was supported. So – they know what to expect and you have to deliver it. The syllabus makes it clear that for Year 11, the discussion/conclusions/evaluation/recommendations of the EEI report should be between 1500 and 2000 words, and for Year 12, between 2000 and 2500 words. The Discussion is one of the key sections of the EEI. It is where you need to show evidence of critical thinking in interpreting your data in relation to your hypothesis and theory presented in your introduction. This is an opportunity to evaluate any trends or patterns in your data, evaluate any mathematical relationships in your data, to critically discuss various aspects of the experiment, such as: what generalisations can be made to support or refute your hypothesis, how the results relate to the physics theory, the limitations of the result, the method used and possible improvements. A good way to handle the writing of the Discussion is to tell readers what you are about to say, say it, and then tell them what you’ve said. It should flow logically so that the reader can easily follow your train of thought. The following paragraph topics should give you a nice flow. There is no need for any subheadings. Introduction – state your Research Question. Make a clear statement about what it was you were trying to find out by restating the Research Question. For example, “This investigation was aimed at answering the …” Explain whether the data support your hypothesis This statement is usually a good way to begin the main part of the Discussion. You might begin by explicitly stating the relationships your data indicate between the independent and dependent variables. Then you can show more clearly why you believe your hypothesis was or was not supported. For example, “The hypothesis that an increase in temperature would ….was (was not) supported by the data.” Include three or more pieces of experimental evidence that support your statement about the hypothesis. All of the evidence and examples must be specific, relevant and explanations given that show how each piece of evidence supports and convinces the reader of your hypothesis. Acknowledge any anomalous data or deviations from what you expected Recognize that saying whether the data supported your hypothesis or not involves making a claim to be justified. As such, you need to show the readers that this claim is warranted by the evidence but that you may need to qualify your conclusions sufficiently. For obvious reasons, your readers will doubt your authority if you (deliberately or inadvertently) overlook a key piece of data that doesn’t agree with your claim that the hypothesis was or was not supported. For example, you may need to point out “However, at higher temperatures the relationship no longer seems to hold ….” Then identify data that is anomalous or that you are discounting (and why). If you don’t point it out and the reader notices it then ‘critical evaluation’ is lacking. Limitations caused by errors and uncertainties. You will need to review your error analysis. Begin by summarising the error analysis done in the previous ‘Analysis’ section of your report and then discuss which measured quantities limited the accuracy of the result, and why, and what could be done about it in the future. Caution: mistakes are not ‘errors’ in the scientific sense. If you made a mistake, you should repeat the trials. If there is no time then make time. Don’t blame mistakes for not getting useful results. Mistakes are just stuff-ups and sloppy work; they are nothing else and shouldn’t be written up. Derive conclusions, based on your findings, about the process you’re studying Discussions must relate the experimental issues to physics theory. If, for example, your hypothesis dealt with the changes in resistance with temperature, then try to make some generalizations about it applying to other materials. Relate your findings to earlier work in the same area (if you can) Is there something about your project that adds to further understanding in Physics? Perhaps you could point to a similar experiment or study and contrast your results and conclusions. Perhaps you have purposely chosen to investigate an issue (maybe even a controversial one) that is somewhat less ‘resolved’ and you can use your own work to add to the debate. Explore the theoretical and/or practical implications of your findings You could end by reflecting on if your work tells the reader something new about the physics concepts under consideration. Alternatively, you could speculate on the medical, industrial, entertainment, scientific or commercial implications of your findings – in other words, what could your discoveries help people to do? In either case, the aim is to make your audience think it was worthwhile reading your work. Future possibilities and recommendations The syllabus talks of ‘exploration of scenarios and possible outcomes with justification of …recommendations’. For this you should note further related investigations that this experiment could lead to. Don’t just say wishy-washy things like ‘try other variables’, ‘be more accurate’, ‘use a digital multimeter’ and so on. These recommendations would only be valid if you can justify them. This is a good chance to show some more critical thinking. 8. Conclusion. In persuasive writing – which is what this report is – you want to use your closing words to convey the main point of your writing. The conclusion has to be very strong and leave the reader solidly understanding your position. A good way to start is by summarizing your results. Make sure not to introduce anything that wasn’t already mentioned in the previous parts of your paper. You should state very briefly the essential conclusion or conclusions you have drawn from the experiment. It should satisfy the statement set out in the Aim at the beginning and must clearly address the stated hypothesis. Be sure to include any conditions that apply to your result (eg ‘at constant temperature’). It is important not to overstate what you can rightly claim as a result of the experiment. Statements like ‘the results supported…’ are more justifiable than ‘the results proved…’. 9. Appendices This is where you place information that is not essential to explain your findings, but that supports your analysis (especially repetitive or lengthy information), validates your conclusions or pursues a related point. Sometimes excerpts from this supporting information (i.e. part of the data set) will be placed in the body of the report but the complete set of information ( i.e. all of the data set) will be included in the appendix. Examples of information that could be included in an appendix include figures/tables/charts/graphs of results, statistics, pictures, lengthy derivations of equations, data sheets, or computer program information. There is no limit to what can be placed in the appendix providing it is relevant and reference is made to it in the report. The appendix is not a place for all the semi-interesting or related information you have gathered through your research for your report. That can go in your journal or logbook. The information included in the appendix must be directly relate to the research problem or the report’s purpose. It must be a useful tool for the reader. Each separate appendix should be lettered (Appendix A, Appendix B, etc). 10. Bibliography or References This list should include any documentation that is not your own, such as books or articles that you used. Guidelines for a bibliography and referencing can be found on the internet but just check which style (APA, Harvard…) your teacher expects. It should be on the task sheet or there may be a whole-school approach available on yourintranet. Material is placed in the body of your report should be acknowledged and referenced appropriately. 11. Acknowledgments In this section you should give credit to everyone who assisted you. This may include individuals, businesses and educational or research institutions. Identify any financial support or material donations you may have received. ——————————————————– Acknowledgements: These hints have been developed through years of trialling at Moreton Bay College with James Keogh and with the feedback from numerous colleagues throughout the state. My appreciation in particular goes to: Megg Kennedy, Chuck Forzatti, David Madden, Kerwyn Kleinschmidt, David Austin, Mark Young, Jason Smith, Kerry Flynn, Mark Harm, Alan Whyborn, John Bright, Mark Shields, Peter Cavallaro, Damien Wallace, Margaret Wegener, Patrick Keleher, Craig Gray and my teacher trainees at Griffith University.
- Assignment status: Already Solved By Our Experts
- (USA, AUS, UK & CA PhD. Writers)
- CLICK HERE TO GET A PROFESSIONAL WRITER TO WORK ON THIS PAPER AND OTHER SIMILAR PAPERS, GET A NON PLAGIARIZED PAPER FROM OUR EXPERTS